Improvements in and around my home
Saturday 3rd September First job of the day was to fit the end panel, this just needed about 10mm removing from the bottom edge, and then a cut-out for the washing machine pipes and plug that will also be used by the tumble dryer plug. Next up was the plinths, I cut the first piece…
Sunday 28th August In order to have full access to the floor area, the first task was to remove the washing machine and tumble dryer. That done, I started laying out the tiles to determine the best fit. Ideally, you want to have either a tile in the middle, or the join between two tiles…
Saturday 13th August First job of the day was to swap out a couple of sockets in the loft bedroom for USB 2 gang sockets. Half of the items we plug-in in that room are USB powered, so this saves a couple of plug points from wallwart transformers. I like MK series sockets and switches…
Saturday 6th August Started off the day by clearing out as much as possible from the cinema room and then vacuuming the floor – it is amazing how quickly dust builds up. Not having any covering on the floor does not help as walking around on the screed itself can generate dust – I could…
Saturday 30th July Started today by installing more electrical sockets for the utility room – radial circuit that ends with a switched fused spur for the under cabinet lights. Next it was time to set the height of the base units so that they would clear the tiles and ensure that they were square and…
Saturday 23rd July I started the day by applying a coat of spirit based undercoat to the skirting and architrave in the cinema room. I then decided to start building the cupboards, this is the pile of boxes that was delivered on the 21st: Moved the Freezer out of the room to make a little…
Sunday 10th July My wife has been busy painting the walls in the Cinema room this week, although I did not take any pictures of the progress, the results can still be seen in the following photos. The ceiling has now had the original coat of 50/50 wash and two coats of white paint. The…
Saturday 20th June Started painting the new utility room, this work continued on and off throughout the week.Most of the painting was completed by my wife, Susan. Since I had changed my mind on the layout of the room, I also needed to relocate the radiator, and it was now to be posttioned under the…
It saddens me to say that on the night of Tuesday 16th June 2015 my garage/workshop was broken into. It looks like the burglar initially attempted to attack one of the garage door locks with a screwdriver. Then when that failed tried pushing on the top corner of the door in an attempt to bend…
Tuesday 17th May Mesh added over the original garage door lintle so that the render will stick. More mesh added over a crack in the brickwork All meshed-up and ready to go. Close-up of the render being applied Frame built inside above window and additional insulation installed. Scratch coar of render complete. Wednesday 18th May…