Adventures in 3D printing
It is finally time for my old printer to bite the dust, it was really starting to look very sorry for itself. I also wanted to reuse some of the parts for the new Hadron. Here is a photo showing the dismantled Prusa i3. Here are the parts that will be reused on the Hadron…
There were a number of parts that needed to be made/printed, either because the kit did not actually contain any printed parts, or because I decided on changes/upgrades to the base Hadron build. Some belt grips, one set for the X and one for the Y axis. Some brackets to attach the power supply to…
I have been collecting parts for a while now and whilst I am still waiting on some, I thought I would get started. First off I needed to cut the Makerslide to length, the build calls for 3 x 330mm lengths and 1 x 430mm length along with 1 x 370mm length of 20x40mm profile.…