Month: October 2014

Well, I decided that in order to rule out the torque issue, I decided to buy a Greg’s Wade reloaded extruder for Prusa i3 and mount this as a direct drive extruder. The extruder was £22.99 with free shipping from ebay and came with all the required hardware for assembly. I assembled the extruder by following the…

I found a suitable single pole single throw 12V/40A automotive relay and wired it up as per the previous diagram, however I managed to connect the solenoid backwards at first so nothing happened when I requested power to the heated bed. This was partly due to translating the pin-out on the relay to the pin-out…