Month: January 2014

I was having yet another bash at persuading my breadboard based hardware to work with the I2C connected LCD display as mentioned in my Panelolu post. I have been bashing my head against a wall with the Repetier firmware for months. Every time I had it use the LCD and uploaded the firmware, the whole…

Progress on the build has been somewhat slow recently (almost non-existant for a couple of months). I eventually caved in and bought a J-Head MK IV hot end from ebay for £21.99. and an Airtripper extruder for £15.95. I have made some progress however with the wiring and neatening up some of the cables.  Here you can…