The bottom drawer was assembled using glue and brad nails
After attaching the brackets for the bench top, I applied filler to all of the cut edges of the plywood and filled in any gaps.
More filler.
I also drilled holes, inserted tee nuts, screws and finally the adjustable feet for the main carcass, and drilled the holes in the sides for the wheel axles..
Applying filler to the edges of the bench top and drawer.
I must have moved whilst taking the above picture, sorry it is a bit blurry.
I cut the slots at the top of the bench legs to attach the hinges and then cut additional domino slots in the bench legs to attach the cross beams, here it can be seen while the glue is drying.
