The various goings on in my workshop
First off I cut a couple of pieces of timber to rase the Mill up so that I don’t hit my knuckles on the bench every time I try to use the Y axis, they will also provide clearance for the stepper motor once that is installed. Suitable 10mm holes were drilled in the raising…
A while ago I finally moved my Mellor lathe from where it has been sat at the back of the garage since I bought it. Now the bed alone weighs over 200lbs (90kg) even without the saddle and tailstock, so this was not a simple task, especially without any help. First I needed to move…