The various goings on in my workshop
The T-track was purchased from Rutlands via Amazon (because Rutlands seem to have temporarily dropped this line) at £53.95 for a pack of four 48″ pieces, three lengths are needed for the edge of the worktop, so £40.46 for the three required and one for some other use elsewhere. Next I shaped the ends of the front clamping…
It seems I did not take any pictures during the assembly process of the extension table frames, Just one that shows the completed frames and one showing them during painting. I needed to cut some hardwood for the sacrificial raised edges, so I cut these on the table saw from a piece of oak up-stand…
Ever since I made my clamps, I have been tightening/loosening them with a socket on a drill and a pair of nuts jammed together on the end of the all thread. I thought it was high time I made some handles. I decided to make use of a jig designed by Neil Paskin. This is…