The various goings on in my workshop
The next part of the articulating spacer was the brass wedges. First I cut a couple of pieces of bar stock then machined them to the correct width. then length. Next I drilled the holes for the stud. Drilled and tapped the holes in the end of the forked piece. Then setup for milling the…
This is the second part of the articulating spacer Here is the Fusion 360 drawing of the relevant part.This second piece is the rear plate that measures 10x100x16mm I did not take a full set of machining pictures for this one, as it is not a particularly complex part. The first operation was to square…
The articulating spacer for the SX2 is a design by Donald Bird that was posted on CNC Forums. The plans are all imperial, but this is a metric sized mill, so I converted all of the dimensions to metric and drew it up in Fusion 360.This first piece is the front mount plate that is…