Month: May 2020

My Lightobject 18mm laser head for K40 did not come with a mounting plate. However it does come with an air assist nozzle. The K40 laser head parts are as shown below. Fortunately Bart dimensioned the mounting plate on his drawing for the lens/mirror assembly (b28018). I drew this out on a piece of paper…

I have always intended to make my own mirrors for this laser cutter following the example of Tim Wehr on his Blog. To my knowledge I have never thrown out a hard disk from any of my many computer builds over the years, as such I have quite a stock to make use of. I…