{"id":10,"date":"2020-05-03T17:34:00","date_gmt":"2020-05-03T16:34:00","guid":{"rendered":""},"modified":"2023-01-18T11:36:34","modified_gmt":"2023-01-18T11:36:34","slug":"mf-tc-part-15-finishing-touches-and","status":"publish","type":"post","link":"https:\/\/blog.hslracing.com\/workshop\/2020\/05\/mf-tc-part-15-finishing-touches-and.html","title":{"rendered":"MF-TC Part 15 – Finishing Touches and Costs"},"content":{"rendered":"

This will probably be the last post on the MF-TC build, covering the last few bits that still needed to be done.<\/p>\n

I rounded off the ends of the handle sides and cut a section of broom handle to length before screwing it in from both ends.<\/p>\n

\"\"<\/a><\/div>\n

Handle in its lowered position.<\/p>\n

\"\"<\/a><\/div>\n

The lengths of hardwood T section that I cut out were attached with screws from the inside of the extension tables.<\/p>\n

\"\"<\/a><\/div>\n

Once the T pieces were attached, the extension tables could be attached to the main workbench and the stops for the extension table legs could be secured in place.<\/p>\n

\"\"<\/a><\/div>\n

The completed workbench with both extension tables attached.<\/p>\n

\"\"<\/a><\/div>\n

Front view, with the bottom drawer now having its front painted black and the stop\/handle in place.<\/p>\n

\"\"<\/a><\/div>\n

The tables below show a breakdown of the costs associated with each of the builds.<\/p>\n

The costs for some items were spread across both builds, and for some items a larger quantity was purchased and only the number used is shown.<\/p>\n

Some of the items I already had, but I show where I bought the original quantity from, any items that involved shipping include that in the price as well.<\/p>\n

MF-TC<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Description<\/th>\nSupplier<\/th>\nCost \u00a3<\/th>\nQty<\/th>\nTotal \u00a3<\/th>\n<\/tr>\n
12mm Plywood 1220x2440mm<\/td>\nSelco BW<\/a><\/td>\n25.50<\/td>\n1<\/td>\n25.50<\/td>\n<\/tr>\n
18mm Plywood 1220x2440mm<\/td>\nSelco BW<\/a><\/td>\n26.39<\/td>\n1<\/td>\n26.39<\/td>\n<\/tr>\n
18mm MDF 1220x2440mm<\/td>\nSelco BW<\/a><\/td>\n31.14<\/td>\n0.5<\/td>\n15.57<\/td>\n<\/tr>\n
Sawn Timber 225×47 (3.6m)<\/td>\nSelco BW<\/a><\/td>\n18.66<\/td>\n0.6<\/td>\n11.20<\/td>\n<\/tr>\n
350mm Drawer Slides<\/td>\nEbay<\/a><\/td>\n5.35<\/td>\n5<\/td>\n26.75<\/td>\n<\/tr>\n
200mm Wheels<\/td>\nEbay<\/a><\/td>\n5.29<\/td>\n2<\/td>\n10.58<\/td>\n<\/tr>\n
T Track 1\/2″ x48″ (pack of 4)<\/td>\nRutlands<\/a><\/td>\n53.95<\/td>\n0.75<\/td>\n40.46<\/td>\n<\/tr>\n
M20 Capped Starlock Washers<\/td>\nEbay<\/a><\/td>\n0.858<\/td>\n2<\/td>\n1.716<\/td>\n<\/tr>\n
M20 Washers<\/td>\nOrbital Fasteners<\/a><\/td>\n0.525<\/td>\n6<\/td>\n0.315<\/td>\n<\/tr>\n
20mm round steel tube (1m)<\/td>\nWickes<\/a><\/td>\n6.95<\/td>\n0.26<\/td>\n1.80<\/td>\n<\/tr>\n
M10 Levelling Feet<\/td>\nEbay<\/td>\n1.36<\/td>\n8<\/td>\n10.88<\/td>\n<\/tr>\n
M10 Tee Nut<\/td>\nAmazon<\/a><\/td>\n0.0999<\/td>\n8<\/td>\n0.799<\/td>\n<\/tr>\n
5x30mm Dominos<\/td>\nAmazon<\/a><\/td>\n0.0521<\/td>\n34<\/td>\n1.771<\/td>\n<\/tr>\n
6x40mm Dominos<\/td>\nAmazon<\/a><\/td>\n0.0717<\/td>\n20<\/td>\n2.438<\/td>\n<\/tr>\n
Total<\/td>\n<\/td>\n<\/td>\n<\/td>\n176.17<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

There were also other incidentals like paint, as well as screws, brad nails and such, I also did not include the costs of any hardwood as this was all taken from Oak I had reclaimed from items like my old front door, or my old kitchen cupboard doors.<\/p>\n

12 Clamps (4 x 700mm, 4 x 1200mm, 4 x 1700mm)<\/p>\n\n\n\n\n\n\n\n\n\n\n\n
Description<\/th>\nSupplier<\/th>\nCost \u00a3<\/th>\nQty<\/th>\nTotal \u00a3<\/th>\n<\/tr>\n
12mm Plywood 606x1220mm<\/td>\nWickes<\/a><\/td>\n11.13<\/td>\n1<\/td>\n11.13<\/td>\n<\/tr>\n
Sawn Timber 225×47 (3.6m)<\/td>\nSelco BW<\/a><\/td>\n18.66<\/td>\n1.4<\/td>\n26.13<\/td>\n<\/tr>\n
M10x40mm Coach Screw<\/td>\nOrbital Fasteners<\/a><\/td>\n0.11568<\/td>\n12<\/td>\n1.389<\/td>\n<\/tr>\n
M10 Threaded Rod (1m)<\/td>\nSelco BW<\/a><\/td>\n2.39<\/td>\n3<\/td>\n7.17<\/td>\n<\/tr>\n
M10 Nut<\/td>\nOrbital Fasteners<\/a><\/td>\n0.03384<\/td>\n36<\/td>\n1.218<\/td>\n<\/tr>\n
M10 Washers 10.5x20x2mm<\/td>\nOrbital Fasteners<\/a><\/td>\n0.01296<\/td>\n12<\/td>\n0.155<\/td>\n<\/tr>\n
M10 Tee Nut<\/td>\nAmazon<\/a><\/td>\n0.0999<\/td>\n12<\/td>\n1.199<\/td>\n<\/tr>\n
Total<\/td>\n<\/td>\n<\/td>\n<\/td>\n48.391<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

This will probably be the last post on the MF-TC build, covering the last few bits that still needed to be done. I rounded off the ends of the handle sides and cut a section of broom handle to length before screwing it in from both ends. Handle in its lowered position. The lengths of…<\/p>\n","protected":false},"author":1,"featured_media":103,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[4,13],"class_list":["post-10","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-uncategorised","tag-mf-tc","tag-woodwork"],"_links":{"self":[{"href":"https:\/\/blog.hslracing.com\/workshop\/wp-json\/wp\/v2\/posts\/10","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/blog.hslracing.com\/workshop\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/blog.hslracing.com\/workshop\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/blog.hslracing.com\/workshop\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/blog.hslracing.com\/workshop\/wp-json\/wp\/v2\/comments?post=10"}],"version-history":[{"count":4,"href":"https:\/\/blog.hslracing.com\/workshop\/wp-json\/wp\/v2\/posts\/10\/revisions"}],"predecessor-version":[{"id":347,"href":"https:\/\/blog.hslracing.com\/workshop\/wp-json\/wp\/v2\/posts\/10\/revisions\/347"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/blog.hslracing.com\/workshop\/wp-json\/wp\/v2\/media\/103"}],"wp:attachment":[{"href":"https:\/\/blog.hslracing.com\/workshop\/wp-json\/wp\/v2\/media?parent=10"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/blog.hslracing.com\/workshop\/wp-json\/wp\/v2\/categories?post=10"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/blog.hslracing.com\/workshop\/wp-json\/wp\/v2\/tags?post=10"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}